Since 1970 Five decades of Motion Engineering
Motors that move Indian industry forward
For over Five decades, REMI Elektrotechnik has been a trusted name in electric and geared motors across the Indian subcontinent — with over 2 million motors approved and operating in the market.
About REMI Motors
Pioneers in electric & geared motor manufacturing in India
REMI Elektrotechnik Limited has built a strong reputation for engineering reliability, product performance and customer-focused service — manufacturing single-phase, three-phase, flame-proof, dual-speed, VFD-compatible, brake, and custom-built motors alongside gear boxes and helical geared motors.
REMI’s motor technology was originally developed under license from VEM, Germany and later enhanced by an experienced in-house design team. In the mid-1980s, REMI further strengthened its geared motor range with technical support from Stephan Werke GmbH & Co., Germany.
3M+
Motors in field
55+
Years of engineering
12
Cities across India
Why REMI Motors
Built for quality, uptime, and the realities of Indian industry
Product Portfolio
One platform Every duty cycle
Flame Proof Motors (IE2 / IE3)
The Flame proof motor is designed for operation in hazardous environments where flammable gases, vapors or dust may be present. It is manufacturing in accordance with relevant IS standards and is suitable for continuous duty operation.
kW : 0.12 kW to 15 kW
HP : 0.16 HP TO 20 HP
RPM (Polarity) : 3000 (2Pole), 1500 (4 Pole), 1000 (6 Pole) & 750 (8 Pole)
Mounting : The motors are offered in standard foot mounting (B3), Flange mounting (B5) and Face mounting (B14) version. Non standard mountings and shaft extension can also be offered on request.
Voltage & Frequency : Motors are suitable for standard voltage (415 Volt +/- 10%) and frequency (50 Hz +/-5%). Motors for special voltage and frequency can be supplied on request.
Protection : IP 55
Ambient : 50 Deg. C
Insulation Class : Class ‘F’ insulation with temperature rise limited to class ‘B’
Custom built special motors
Robust and compact construction.
Safe operation in hazardous and explosive atmospheres.
High efficiency and low power consumption
Low noise and vibration levels.
Long running life with minimal maintenance requirement.
Gear Box
An inline helical gearbox is a highly efficient speed reduction unit. The input and output shafts are aligned on the same axis, providing a compact and space saving design suitable for a wide range of industrial applications.
kW : 0.37 kW to 7.5 kW
HP : 0.50 HP TO 10 HP
RPM : 14 to 410
Mounting : The motors are offered in standard foot mounting (B3), Flange mounting (B5) version. Non standard mountings and shaft extension can also be offered on request.
Voltage & Frequency : Motors are suitable for standard voltage (415 Volt +/- 10%) and frequency (50 Hz +/-5%). Motors for special voltage and frequency can be supplied on request.
Custom built special motors
Robust and compact construction.
High efficiency and low power consumption
Low noise and vibration levels.
Long running life with minimal maintenance requirement.
Helical Inline Geared Motors
Inline Helical Geared Motors are compact and efficient drive units designed to provide high torque output with smooth and quiet operation.
kW : 0.12 kW to 30 kW
HP : 0.16 HP TO 40 HP
RPM : 1.5 to 500
Mounting : The motors are offered in standard foot mounting (B3), Flange mounting (B5) version. Non standard mountings and shaft extension can also be offered on request.
Voltage & Frequency : Motors are suitable for standard voltage (415 Volt +/- 10%) and frequency (50 Hz +/-5%). Motors for special voltage and frequency can be supplied on request.
High efficiency helical gear design
Compact inline shaft configuration
High torque output capability
Custom built special motors
Robust and compact construction.
High efficiency and low power consumption
Low noise and vibration levels.
Long running life with minimal maintenance requirement.
STD THREE PHASE MOTORS (IE2 / IE3)
The motors are a high-performance electric induction motor designed for reliable and efficient operation in industrial applications. It is manufacturing in accordance with relevant IS standards and is suitable for continuous duty operation.
kW : 0.09 kW to 55 kW
HP : 0.12 HP TO 75 HP
RPM (Polarity) : 3000 (2Pole), 1500 (4 Pole), 1000 (6 Pole) & 750 (8 Pole)
Mounting : The motors are offered in standard foot mounting (B3), Flange mounting (B5) and Face mounting (B14) version. Non standard mountings and shaft extension can also be offered on request.
Voltage & Frequency : Motors are suitable for standard voltage (415 Volt +/- 10%) and frequency (50 Hz +/-5%). Motors for special voltage and frequency can be supplied on request.
Protection : IP 55
Ambient : 50 Deg. C
Insulation Class : Class ‘F’ insulation with temperature rise limited to class ‘B’
Custom built special motors
Robust and compact construction.
High efficiency and low power consumption
Low noise and vibration levels.
Long running life with minimal maintenance requirement.
Standards & Compliance
Designed for Safety
Verified for performance
Standards & Compliance
Designed for Safety
Verified for performance
IS 325
Three-phase induction motors
IS 2148
Flame-proof motors
IS 1231
IS 2223
IS 2223
Flange-mounted motor dimensions
Manufacturing Process
In-house Integrated Inspected at every stage
REMI is one of the very few motor manufacturers in India that produces key motor components in-house. Modern CNC facilities, an independent inspection team and integrated production give us tighter control over quality, consistency, customization and delivery.
Applications
Powering
operations across industries
From heavy-duty machinery to process-driven applications REMI motors are built to support reliable movement, torque, power and operational continuity.
Spec a motor
Source a part
Schedule a service.
- motors@remigroup.com
- Sales : 022-40589800, 022 -40589837, 022-40589831
- Factory: Building A/B, Survey No. 65/1, Naikpada, Taluka, Waliv, Vasai East, Maharashtra 401208